ELEMENTS OF A PRESSURE WASHER

Pressure washers are known for their incredible cleaning power. This power can be utilized over a wide range of applications from residential, to contractors and heavy industry. Understanding how a pressure washer operates will help determine which one is the best for you.

THREE ACTIVE CLEANING FACTORS

AGITATION

The impact force of pressurized water hitting a surface breaks-up dirt particles and washes them away. In many cases, water and pressure is all that is required, especially for residential use.

NEED MORE CLEANING POWER?

SOAP DETERGENT

If pressurized water isn’t enough to get the job done alone, then adding soap will increase your cleaning power. This is especially true when trying to clean grease or oils. Soaps will chemically break the bonds between grease and grime allowing them to get flushed away more effectively.

MOST POWERFUL CLEANING

HEAT

Adding heat to your cleaning process is essential for oil and grease clean- up especially in industrial, automotive and agriculture industries. Hot water penetrates and melts grease molecules by lowering the water’s surface tension, greatly reducing cleaning time.

(Note: do not run hot water into your pump unless your pressure washer is specifically capable of doing this).

MEASURING THE CLEANING PERFORMANCE

When comparing pressure washers, it is important to look at how their performance is measured, this will determine the type of unit you require:

PSI (Pounds per Square Inch):

Measures the pressure or force of the water coming out of the tip. Can be viewed as the speed of the water, or the stripping power. This will help determine how powerful the water stream will be.

GPM (Gallons per Minute):

Measures the volume of water flowing out of the tip. Can be viewed as the weight of water, or the rinsing power. This will help determine how fast you can clean a surface.

Combined together, PSI and GPM dictate the cleaning power of the machine

MECHANICAL COMPONENTS

MOTOR / ENGINE

Spins the pump

ELECTRIC MOTORS

Runs quietly, minimal maintenance, and zero emissions allowing them to be used indoors.

GAS ENGINES

Delivers exceptional power and portability.

DRIVE SYSTEM

Connects engine to pump

DIRECT DRIVE

The pump is connected directly to the engine. Compact and cost effective.

BELT DRIVE

Gives the pump a longer life by reducing the heat and vibration from the engine. Used in commercial and industrial applications.

PUMP SYSTEM

Pressurizes the water

AXIAL

Wobble plate system. Direct drive, ideal for many light and medium duty applications.

TRIPLEX

Features a crankshaft and piston system that delivers greater power and longer life. For medium to heavy-duty applications.

UNLOADER SYSTEM

Controls water flow in the pump

BUILT-IN

Most common, very economical

EXTERNAL

Commercial and industrial machines

(It is recommended that user doesn’t adjust the unloader unless trained to do so).

DELIVERY SYSTEM

HOSE, WAND AND TIPS

It is important to match the accessories to the power of the machine. Always check the ratings on new accessories. If they are incorrect, it could lead to poor performance or become a hazard and cause damage or injury.

BENEFITS OF USING A HOT WATER PRESSURE WASHER

Hot water pressure washers deliver the best cleaning results. They are the most efficient and effective at removing grease, oil and grime.

THE POWER OF HEAT

The cleaning of a surface depends on agitation, soap and heat. With heat being a cleaning power multiplier. A hot water pressure washer has an unsurpassed ability to clean the toughest grease and grime from heavy equipment, garages, parking lots and buildings.

WHEN TO USE HOT WATER UNIT

For many jobs, such as cleaning off dirt, algae, or stripping off paint, a cold water machine will do the job. However, if you are planning to clean machinery, engine parts or anything else with grease and oil then a hot water machine will be needed.

HOW THE WATER IS HEATED

Like all pressure washers, water is fed into the pump. The pump then pressurizes the water and forces it through the heating coil. Diesel is sprayed and then ignited, creating a fire that burns in the middle of the coil. The design of the system rapidly brings the temperature of the water up to 200°F/93°C before exiting through the wand.

It is important to understand that cold water is fed into the pump, and it is heated afterwards. Unless specifically told otherwise by the manufacturer, never send hot water into a pressure pump because this will cause it to overheat and cause premature failures.

MARKETS WHERE HOT WATER PRESSURE WASHERS EXCEL

Agriculture

Every piece of machinery in this industry is working in the fields rain or shine. After a season of hard work these machines need to be cleaned as part of their maintenance schedule. Hot water pressure washers rapidly and effectively remove layers of dirt, grease and grime.

Rental Property

Ideal for cleaning buildings and large surface areas quickly and efficiently. A hot water pressure washer mounted on a truck or trailer provides a mobile service that will handle this job quickly and effectively. For large surface areas like parking lots, specialized accessories such as Whirl-A-Ways and Rotary Nozzles will make the job faster.

Trucking

Big Rigs come back to the truck yards covered in dirt, tar, and road salt. A hot water pressure washer is the best way to clean your trucks.

Waste Management

Garbage and recycling trucks have to pick up the worst of the worst. These trucks have to be maintained on a regular basis and a hot water pressure washer is needed for sterilizing surfaces.

Food Industry

Restaurants and wineries must meet high standards to pass inspection. A hot water pressure washer can be used to thoroughly clean and disinfect critical surfaces such as floors, kitchen hoods, ducts, and waste areas. Hot water cleaning also requires less detergent which saves you money and helps protect the environment.

Construction

Bull dozers, excavators and similar heavy machinery are working in dirt all day. It is important to keep all the moving parts free from build-up of dirt and grease. A hot water pressure washer will quickly cut through and wash away the grime to keep your heavy machines operating effectively.

Mobile Washing Services

For businesses that provide mobile pressure washing services, having a machine that cleans quickly and effectively is critical when time is money. A hot water pressure washer makes the best use of time to get the job done.

Manufacturing

Industrial machines and hardware need regular cleaning that a hot water pressure washer will efficiently accomplish.

WHEN BUYING A PRESSURE WASHER YOU WANT TO BUY ONE THAT SUITS YOUR APPLICATIONS

The below chart should be used as a guideline, though consider the below when making your choice;

• Pressure on the surface depends heavily on the distance of the pressure washer nozzle. Standing 20 feet away with a 4000PSI/4GPM pressure washer is a lot safer than putting a 1500 PSI/ 1.5 GPM pressure washer nozzle right up against the surface.
• The angle of the spray will directly relate to the impact force of the water on the surface. Coming straight at a 90° angle has a lot more power than coming at a shallow angle.
• What you are trying to clean off determines how powerful of a machine is needed. It is comparatively easy to wash off loose algae compared to surface oil stains.
• Some of the lower power machines may be able to handle bigger jobs depending what is being cleaned off, but it will take more time.
• A powerful machine in the right hands can do any small job, but greater care is needed when cleaning fragile surfaces.
• Generally speaking, the more area you intend to pressure wash, the more powerful of a machine you should get because the work will be done faster.
• Even in the optimum range you need to be careful. Start spraying at a safe distance and work your way closer to the surface.

RED NOZZLE - 0°

Produces a single highly concentrated stream that has the highest impact force. This stream will cut through and break apart caked-on mud and dirt. The more powerful the pressure washer, the more care is needed to avoid damaging or destroying surfaces.

YELLOW NOZZLE - 15°

Excellent for heavy-duty cleaning against hard surfaces such as concrete or asphalt. The concentrated spray pattern delivers a significant amount of force.

GREEN NOZZLE - 25°

Suited for cleaning decks, walkways, brick and similar items. It has a balanced combination of PSI and GPM.

WHITE NOZZLE - 40°

Effective at cleaning off algae and mud. Wide spray pattern, allows it to quickly clean large area without much impact force.

BLACK NOZZLE - 65°

Largest orifice for use with soap injector which requires high volume of water to create the siphon action. Also effective for rinsing away loose debris and dirt.

ROTARY NOZZLE - 0°

Unique nozzle that spins a 0° tip in a cone shape. It excels at deep cleaning of hard surfaces such as driveways.